How to install the led panel light (Suspended Installation)
 
1) Prepare accessories and tools.(The quantity of accessories may be different for different dimension of lamps, this instruction is based on SP2-6060)

 
2)Put the steel wire through the “bullet head” screw nut and wire locker.

 
3) Mark the dri ll hole on the cei ling according to the drill hole position template, and drill the proper hole for number⑤ Bolts.

 
4) Put the bolt in the hole, using screw to install the “T” shape screw nut.

 
5) Put the steel wire through the “T” shape screw nut, and get the steel wire out from the hole on the “T” shape screw nut, fix the wire locker.

 
6) Fix the driver on the back of the panel light with adhesive tape or screws, and connect the driver to the panel light.

 
7) Screw the “bullet head” nut to the screw on the back of panel light.

 
8) Adjust the length of each steel wire by wire locker, to keep the panel light in balance and stable.

Click to view more installation：
1.Suspended Installation
2.Surface mounted installation
3.Recessed installation (for gypsum plaster ceiling)
4.Recessed installation (for cut out ceiling)